Application of inline centrifugal pump

The inline centrifugal pump is a close-coupled type of pump in which the pump and motor are aligned on a common shaft. This design offers many advantages over other types of pumps, such as the ability to operate at high speeds and handle viscous liquids.

The inline centrifugal pump is often used in applications where space is limited, such as in agricultural irrigation, water treatment plants, and HVAC systems.

Multistage inline centrifugal pumps are used for high-pressure applications in a variety of industries.

Some common uses for these pumps include:

-Pressure washing

-Car washes

-Waterjet cutting

-Firefighting

-Irrigation

What is an inline centrifugal pump

An inline centrifugal pump is a type of pump that is installed in a piping system so that the pump and motor are in line with each other. The advantage of this over other types of pumps is that it can be used in systems where there is not a lot of space, such as in HVAC systems.

An inline centrifugal pump is a type of centrifugal pump that is designed to be installed in a piping system. The pump has a horizontal shaft and is designed to be used in applications where space is limited.

Inline centrifugal pumps are typically used for pumping clean, non-viscous fluids at moderate pressures.
What is the role of inline centrifugal pump

In oil and gas industry

Inline centrifugal pumps are commonly used in oil and gas industry applications. These pumps are designed to handle high-viscosity fluids, such as crude oil, and can also be used for light-duty applications such as gasoline or water.

Inline centrifugal pumps are designed for use in systems where the liquid is not compatible with pump materials, such as when pumping acids or other corrosive liquids. The pump casing and all wetted parts are made of corrosion-resistant material, such as stainless steel, Hastelloy, or titanium.

In process industry

The role of an inline centrifugal pump is to move fluids by the application of centrifugal force. The fluid enters the pump impeller along or near the rotating axis and is accelerated by the impeller, moving outward from the center of rotation.
Working principle of inline centrifugal pump

1.An inline centrifugal pump is a type of centrifugal pump that is installed in a piping system so that the pump shaft is in line with the pipe. This arrangement is typically used when space is limited and the piping layout makes it difficult to install a standard end suction centrifugal pump.

2.The working principle of an inline centrifugal pump is similar to that of a standard end suction centrifugal pump. The main difference is in the design of the impeller and diffuser. The impeller on an inline centrifugal pump has vanes that are perpendicular to the pump shaft, while the vanes on a standard end suction centrifugal pump are parallel to the shaft.

3.This difference in design allows for a more efficient flow of water through the impeller and diffuser, resulting in higher flow rates and pressures than what can be achieved with a standard end suction centrifugal pump.

The principle of an inline centrifugal pump is very simple. It consists of a rotating impeller that draws water into the pump and then forces it out under pressure. The force created by the impeller gives the water its energy.

What industries need inline centrifugal pump

Inline centrifugal pumps are commonly used in industries such as:

- Food and beverage processing

- Pharmaceuticals

- Cosmetics

- Water and wastewater treatment

- Pulp and paper

- Oil and gas

- Chemicals

- Pulp and paper

- Power generation

- Marine

The position of inline centrifugal pump in the market

Centrifugal pumps are the most popular type of pump on the market. There are many reasons for this, but the main one is that they are very versatile and can be used in a variety of applications.

One of the most common uses for centrifugal pumps is inline pumps. Inline pumps are installed in a pipeline and are used to pump fluids from one point to another.

Inline centrifugal pumps have many advantages over other types of pumps, such as submersible pumps and positive displacement pumps.

The centrifugal pump is the workhorse of the industrial world. Its simple design and reliable operation have made it the choice for a wide variety of applications.

Inline centrifugal pumps are commonly used in residential and commercial applications such as boosting water pressure, circulating hot water, and moving liquids through filters. In industry, they are used for a variety of tasks such as cooling towers, boiler feedwater systems, and general transfer duties.

While there are many different types of centrifugal pumps on the market, inline models have a few advantages that make them well suited for certain applications.

Model:	CDLF150
In&outlet size:	Φ32/50/74/80/100/125/150
DN flange size:	DN25/32/40/50/65/80/150

Flow capacity range:	0.4 – 240m3/h
Head/pressure range:	6 – 305m
Power range:	0.37 – 110kw

Model:	TD32/40/50/65/80/100/125/150/200/250/300
In&outlet size:	Φ32/40/50/65/80/100/125/150/200/250/300
DN flange size:	DN25/32/40/50/65/80/150

Flow capacity range:	2 – 1200m3/h
Head/pressure range:	4.4 – 85.5m
Power range:	1.1 – 132kw

Model:	TD32/40/50/65/80/100/125/150/200/250/300
In&outlet size:	Φ32/40/50/65/80/100/125/150/200/250/300
DN flange size:	DN25/32/40/50/65/80/150

Application of inline centrifugal pump